Commercial AC Installation · South Florida
Commercial AC installation in South Florida
New systems, rooftop replacements and build-out HVAC for businesses.
Atención en español en todo el sur de Florida.
- Financing available
- Commercial HVAC
- Air duct cleaning
- Duct sealing
- Indoor air quality
- Ductwork
- Heat pumps
- Mini-split AC
- Rooftop units
- AC repair
- Smart thermostats
- AC installation
- Dehumidifiers
- Se habla español
Commercial AC Installation
What it covers
You may need this service when you are opening a new space, changing an old floor plan, or replacing equipment that no longer lines up with the ductwork. Some projects need a new air handler, new duct runs, or a rooftop disconnect moved to a better spot. Others need a closer look at airflow at each register, the curb under a roof unit, and the condition of the pan and insulation. For a build-out, measure the planned rooms and note where walls, doors, and kitchen equipment will sit.
What we check
What we check
For a new commercial system, we look at the space first, then the duct runs, return paths, and thermostat locations. We check the unit setting area, the curb or pad, the drain route, and the electrical connection points so each part matches the layout in the building. In a tenant build-out, we also measure walls, ceiling space, and room use so supply air can reach the right areas. We test airflow at the grilles before we finish the visit.
For rooftop unit replacement, we inspect the curb, the roof opening, the rail supports, and the old duct connections before the new unit goes in. We check the condensate drain, the power feed, and the control wiring so the equipment can be tied in without loose ends. After placement, we test start-up, fan direction, thermostat response, and air delivery at each zone. We also look for clear access around the unit, because service space matters for future work.
Commercial AC Installation
Choices to make
A new commercial system can make sense when the indoor unit cabinet is rusted, the coil is leaking, the compressor is weak, or the duct connections no longer fit the space. In other cases, a repair may still be the better path if the problem is a loose contact, a failed capacitor, a clogged drain, or a control issue. We look at the age of the unit, the condition of the ducts, the electrical panel, and the roof curb before choosing a path. We also check the return size and the supply layout before any replacement.
For tenant build-outs, the decision often starts with how the space will be used, where the rooms open up, and how much air the new layout needs. A rooftop unit replacement may call for a different cabinet size, curb adapter, control setup, or duct connection than the one now in place. We also look at the thermostat location, the drain line route, the power feed, and whether the existing ductwork can handle the new load. A clean inspection of the roof penetration helps confirm the opening matches the new unit base.
Commercial AC Installation
After the work
After the visit, you are left with a clear picture of what the space needs and what parts were checked. That can include the rooftop unit, indoor air handler, duct runs, thermostat wiring, drains, electrical connections, and the layout for a new tenant space. If we found worn parts, poor airflow points, loose fittings, or a pan with standing water, we note where those conditions sit and what was adjusted or replaced. Keep an eye on short cycling, water near the unit, and breakers that trip more than once.
To help the system stay in good shape, keep the filter clean, leave access panels clear, and make sure supply and return grilles are not blocked by furniture, boxes, or décor. In a restaurant, shop, office, or warehouse, grease, dust, and stored goods can change how the system moves air, so those areas need regular checking. Watch the drain line for clogs, and look at belts, insulation, and thermostat settings when the space changes use. Check that the outdoor unit stays free of leaves, trash, and other debris.
How it works
From the first call to the finished job
You call or WhatsApp us
Tell us what the system is doing. We respond right away, in English or Spanish.
We find the cause
We test the system and show you what failed before any work starts.
You decide
A clear recommendation and straight answers on price. Then we do the work and leave it clean.
Where
Commercial AC Installation from Miami to West Palm Beach
Questions
Commercial AC Installation: common questions
I’m opening a restaurant in a shell space. What size HVAC system does the dining room need?
For a tenant build-out, we start with the space layout and the load from the kitchen, dining room, and back-of-house areas. Duct runs, return air paths, ceiling space, and equipment placement all matter. We also think about outside air needs, exhaust balance, and where controls will be mounted. The goal is to plan a system that fits the use of the space before the build-out gets too far along.
My rooftop unit quit on our office. Does the replacement have to match the old one?
With a rooftop unit replacement, the old cabinet size, curb opening, duct connections, and electrical setup all need a close review. Match-up is not only about the unit sitting in the same place. Drain routing, access clearances, and airflow through the existing duct system can change what is practical. We also review the condition of the curb and nearby roof area before setting the new equipment.
I am adding a second-floor suite. How do you decide where the supply and return ducts should go?
When a new commercial system is going into a tenant space, duct placement can shape how the rooms are used. Supply registers may need to avoid long dead ends, and returns need a clear path back to the equipment. Ceiling height, wall layout, and the type of rooms in the suite all matter. We also think about noise, service access, and how the system will tie into the rest of the building.
Our warehouse has uneven cooling near the dock doors. Could the ductwork be part of the problem?
Ductwork can change how air moves through a warehouse, especially near large openings and long runs. We review supply size, return locations, insulation, and whether some areas are getting more air than others. Diffuser placement and duct sealing can also affect balance across the space. Sometimes the issue starts with layout, and sometimes it starts with how the existing equipment was connected.
I need a new AC for my shop. What matters most besides the unit itself?
A commercial AC installation is more than setting equipment in place. We study the electrical connection, condensate drainage, thermostat location, and how the system will tie into the ductwork. Clearance for service access matters too, along with rooftop or ground placement if the site allows either option. The rest of the system has to support the new unit, not just sit beside it.
Call Torres — we respond right away.
Miami-Dade, Broward and Palm Beach. Se habla español.
WhatsApp the same number — se habla español.