An air conditioning technician checking a gauge set at an outdoor AC unit beside a South Florida house

AC Installation & Replacement · South Florida

AC installation in South Florida: sized right, not guessed

A load calculation before any recommendation, equipment from all the brands sold in the U.S., and financing for new systems.

Atención en español en todo el sur de Florida.

105
Cities & communities served
3
South Florida counties
33
Services under one roof
2
Languages: English & Spanish
  • Dehumidifiers
  • Mini-split AC
  • Financing available
  • Ductwork
  • Indoor air quality
  • Se habla español
  • Commercial HVAC
  • Heat pumps
  • Smart thermostats
  • Duct sealing
  • Air duct cleaning
  • Rooftop units
  • AC repair
  • AC installation

AC Installation & Replacement

What it covers

AC installation and replacement starts with a load calculation for the home or business. We look at the square footage, insulation, window area, ceiling height, and the rooms that need the most cooling. A new central AC system can make sense when the old outdoor unit or indoor unit no longer works well with the rest of the equipment. We also check the ductwork for size, layout, and wear, since the new system has to move air through the existing ducts. The thermostat location should be checked before any new wiring is set.

This service also covers replacing both the indoor and outdoor equipment when one part has failed or the system is old enough that repairs no longer fit the situation. We look at the return and supply ducts, the drain line, electrical connections, and where the thermostat sits on the wall. New systems for restaurants, offices, warehouses, and homes often need a setup that matches the space and the use of the rooms. Financing may be an option for a new system, and the control wiring should be tested before the panels go back on.

Before and after photos of an AC system replacement: the old outdoor unit and indoor air handler, then the new outdoor unit on its pad and the new air handler in the same closet
Before and after, from a Torres job: the old outdoor unit and air handler out, a new matched system in.

What we check

What we check

We start with the rooms, square footage, windows, and sun exposure, because those details shape the load calculation. Then we look at the duct layout, return paths, supply runs, and any tight spaces where new equipment may need extra clearance. We check the old indoor unit, outdoor unit, drain line, and electrical connections when a replacement is involved. That tells us what can stay, what needs to change, and how the new central AC system will fit the ductwork.

We also check the thermostat location, wiring, and control setup, because the control point affects how the system reads the space. Financing is available for new systems, and we can go over that while we inspect the equipment area and access points. We look at breaker size, disconnects, condensate drain slope, and the condition of the air handler pad or stand. We also test airflow at supply registers and returns to see whether the new system needs duct changes before installation.

AC Installation & Replacement

Choices to make

The choice between repair and replacement starts with the age of the equipment, the condition of the indoor coil, the outdoor unit, and the control parts. A unit with repeated breakdowns, uneven cooling, or loud startup can point to a larger change instead of another fix. We also look at the load calculation for the home or business, because the right size depends on the rooms, windows, and use of the space. Check the air filter and the drain line before deciding on a bigger repair.

When a new central AC system makes sense, we look at whether the ductwork can handle the airflow and whether the indoor and outdoor units should be replaced together. A matched system can also include thermostat setup and checks for the return and supply runs. For some projects, financing for new systems is part of the decision, along with the age of the current equipment and the condition of the wiring near the air handler. Make sure the thermostat location is not in direct sun or near a supply vent.

AC Installation & Replacement

After the work

After the visit, you have a clear record of the load check, the condition of the indoor unit and outdoor unit, and how the new system was matched to the ductwork and thermostat. If the old equipment was removed, the new parts were set in place, connected, and tested for basic operation, wiring, drain lines, and air flow at the registers. You can watch for short cycling, uneven room temperatures, water near the air handler, and thermostat settings that do not match the space. Keep the filter size that fits your cabinet and check it before it gets packed with dust.

To keep the system in good shape, look at the return grille, supply registers, and the area around the air handler for dirt, bent fins, or blocked airflow. Keep boxes, chairs, and stored items away from the outdoor unit so air can move through the cabinet. If the thermostat uses batteries, check them before they fail. Wipe dust from the thermostat cover and keep the indoor drain area clear so water has a path out. Take note of new sounds, repeated breaker trips, or any stain around the drain pan.

How it works

From the first call to the finished job

01

You call or WhatsApp us

Tell us what the system is doing. We respond right away, in English or Spanish.

02

We find the cause

We test the system and show you what failed before any work starts.

03

You decide

A clear recommendation and straight answers on price. Then we do the work and leave it clean.

Questions

AC Installation: common questions

My house has an addition. What size AC do I need after that change?

We look at the full home, including the added rooms, ceiling height, windows, insulation, and sun exposure. That helps us size the new system based on the space you have now, not the old setup. We also look at how the ductwork serves each area, since one room can change the balance for the whole system.

My old outdoor unit still runs, but the indoor unit is failing. What do I need to know?

A replacement can involve more than swapping one part. We check the outdoor unit, indoor unit, refrigerant lines, electrical connections, and air handler condition together. If one piece has worn out, the other parts may not match well anymore. That lets us talk through whether a full system change or a partial replacement fits the equipment you have now.

I have narrow ducts in my attic. Will a new central AC work with them?

Duct size and layout matter just as much as the unit itself. We look at how much air the ducts can move, where the returns are placed, and whether there are leaks, crushed sections, or sharp turns. That inspection helps us see if the new system can connect to the existing ductwork or if changes are needed for airflow.

I want a new thermostat. Will it work with my new AC system?

Thermostat setup starts with the equipment controls, wiring, and the features you want to use. We check whether the thermostat can communicate with the new system and whether the wiring at the wall matches the equipment. Then we set the controls for cooling, fan operation, and basic temperature settings so the system and thermostat work together.

My old AC stopped working. How does financing work for a replacement system?

Financing is available for new systems. We can walk through the replacement options first, so you know what is included in the install and what is being replaced, and then talk about how financing fits that plan.

Call Torres — we respond right away.

Miami-Dade, Broward and Palm Beach. Se habla español.

Prefer to write? Send the form and we call you back.

Call now · we respond right away
(754) 209-4747
CALL US