Air conditioning in Palm Beach, done honestly

Older homes here can have original ducts, patched joints, and returns that were added around older room layouts. We look at the duct seams, the return openings, and the cabinet connections at the air handler. If the equipment was replaced later, we also check whether the airflow parts still fit the newer unit, because older Palm Beach homes can keep one weak piece even after the system changes.

In a building with many units, the indoor unit, the drain pan, and the closet space all affect service access. We check how the air handler sits in the closet, how the return air gets back to it, and whether the access panels open far enough for inspection. Shared building layouts in Palm Beach can also change where the condenser sits, so the indoor and outdoor parts have to be checked as one system.

Salt air near the ocean or bay can wear on the outdoor coil, the fins, the cabinet, and the electrical connections. We look for bent or crumbling fins, corrosion on the metal skin, and loose wires at the disconnect and contact points. In Palm Beach, the outdoor unit sits in a coastal setting, so the check has to cover the parts that face the air and weather outside.

Here, many homes heat with electricity, so the heat pump and the strip heaters in the air handler both matter. We check the thermostat call, the heat strip wiring, the relay, and the airflow through the unit. When a Palm Beach home uses electric heat, the indoor cabinet and the heating parts need to be looked at together, because the problem can sit in the controls or in the strips themselves.